Certain

FEHRLopedia

content name:	TRL636 The application of Enrobe a Module Eleve in flexible pavements
	An investigation was carried out into the properties and performance of a high modulus asphalt material designed using the French design method with ingredients readily available in the UK. The asphalt material, known as Enrobe a Module Eleve (EME) Class 2, was evaluated under full-scale loading in the Pavement Test Facility (PTF) at TRL. Two test sections were constructed using full-scale plant to provide a direct comparison of the performance of an EME binder course with that of a heavy duty macadam (HDM) binder course. This direct comparison allowed the performance of the 'new' material to be calibrated against a material that experience has shown to perform well in service. Two additional test sections were used to test a one metre wide (wheel-track) trench inlay to confirm that it could be included as a realistic and sustainable alternative maintenance treatment for surface rutting on heavily trafficked roads. The EME Class 2 material deformed less than the HDM and no cracking was observed along the joints adjacent to the trench. Indirect Tensile Fatigue Testing (ITFT) and Indirect Stiffness Modulus (ITSM) stiffness testing before and after saturation with water, and permeability measurements indicated that EME would be durable and would act as an impermeable layer beneath a thin surface course. No reduction in stiffness was measured after 50 days of soaking, and the cracking resistance of the richer EME Class 2 was superior to that of HDM. The very low air voids obtained in both the HDM and the EME binder courses using conventional plant, confirmed that the laying and compaction of EME Class 2 layers does not require special measures. As a consequence of this work an interim specification for EME Class 2 has been developed and specification trials under contractual conditions are planned for the near future. These will provide confirmation of the material's structural properties and mixing, laying and compaction characteristics

content link:	http://www.trl.co.uk/online_store/reports_publications/trl_reports/cat_highway_engineering/report_the_application_of_enrobe_a_module_eleve_in_flexible_pavements.htm

content language:	English
English summary:	no

user comments

This content is related to:

project type

National projects

area of interest

pavement engineering

construction materials

road surface properties

SUB-THEMES

user type

road authorities/owners

research labs

construction companies

material producers

Other similar contents:
The similarity algorithm calculates how much two contents in the system are similar to one another. So far, similarity is calculated based on similarity of the project type, area of interest and user type. Generally, if two contents have more parameters in common they are more similar to each another. More information.

content	description	similarity (%)
Improving on flexible pavement IRI prediction by correcting for possible bias	The smoothness prediction models (in IRI) currently incorporated into the Mechanistic-Empirical Pave ...	80
TRL639 Guidance on the development assessment and maintenance of long-life flexible pavements	The report provides guidance on the construction, assessment and maintenance of pavements that are n ...	80
Structural Evaluation of flexible pavements using non destructive tests	The aim of this paper is to contribute to the improvement of the methodologies used in structural pa ...	78.75
Warm asphalt bituminous mixtures with regards to energy, emissions and performance	With the current concerns about sustainable development and greenhouse gas emissions in various fiel ...	76.79
Development of a Recycled Polymer Modified Binder for Use in Stone Mastic Asphalt	The number of commercial vehicles using Irish roads has increased considerably in recent years, lead ...	73.33
The performance of wet visibility road marking final report on Provväg 19982000	The poor visibility of road markings in the dark and wet is a well known problem. In rainy weather, ...	72.5
Water flow paths through roads - a field study	Understanding water flow in roads is important from a road engineering perspective as well as an env ...	70.83
NCHRP Guide for Pavement Friction - Final report	TRB’s National Cooperative Highway Research Program (NCHRP) Web-Only Document 108: Guide for P ...	70.83
Trials of a mobile MLS technique for characterising road surface absorption	A test based upon Maximum Length Sequence (MLS) methods has been developed for the in-situ measureme ...	70
Calculating a bridge assessment dynamic ratio using a bridge weigh-in-motion system	Bridges are designed and assessed for characteristic load effects, that is, those load effects corre ...	68.33

While we are still building the FEHRLopedia with the help of experts like yourself, you may find that not all subjects are covered as deeply as you need. Therefore if you don't find the results you are looking for, please try the CERTAIN custom Google search. We would be grateful if you would create new content for the FEHRLopedia from your results. Thanks for your assistance in building the system.